Whirlwind Qbox Tester All-in-One Audio Line Tester

471.00 USD CAD

The Whirlwind Qbox is the all-in-one audio line tester, ideal for applications such as live sound, maintenance, installation work — anywhere audio runs down a cable.

Out of stock

SKU: WHI.QBOX Categories: , Tag:

Description

Whirlwind Qbox Tester

The Whirlwind Qbox is the all-in-one audio line tester, ideal for applications such as live sound, maintenance, installation work — anywhere audio runs down a cable. The Qbox includes a microphone, a speaker, a test tone generator, outputs for standard headphones, a 1/4″ jack for line-in or a 2k Ohm (telephone) earpiece out. A handy clip attaches the Qbox to your belt or equipment rack.

Simply generate into or listen to audio at any point in your system from the mics to the power amps to quickly confirm which sections are working and which ones aren’t. The Qbox can quick-check dynamic mics and cables without firing up the entire system. Use the bult in mic or tone generator at three different levels for activating a signal path or identifying a specific cable in a pile of cable ends. Powered by a single standard 9 V alkaline battery and housed in rugged ABS, the Qbox is light yet able to withstand the wear and tear of field work.

Features:

  • For an instant hands-free intercom, just plug in headphones and hook up one Qbox on each end of a line and use the built-in microphone.
  • Use it to monitor a standard 3-wire intercom feed — LEDs confirm the presence of intercom or phantom power.
  • Use it as a squawk box to the stage from the main audio console during set-up. Works in a pinch as a handy, portable, powered monitor, too.
  • The SOURCE section of the Qbox lets you send a tone or the signal from the built-in condenser mic at mic or line levels.
  • The SPEAKER volume control lets you confirm incoming signals at mic or line level.
  • A handy MONITOR switch allows the user to listen to a balanced signal or to two separate unbalanced signals on pin 2 or 3 (referenced to pin 1), such as a two-channel intercom.
  • A SPLIT switch disconnects the two XLRs from each other so tone or internal mic can be sent out of one XLR while you listen to what’s coming back on the other. Or connect the XLRs together and “loop-through” or daisy-chain units.
Input Impedance 40K Ohms balanced
Maximum Input Level +14dBm balanced
Output Impedance 100 Ohms balanced
Maximum Output Level +14dBm balanced
Pad Range -50 and -20 dBm
Range of Speaker Volume Control 60dBm
Headphone requirements 8 to 600 Ohms
Power requirements 9V alkaline battery (Duracell MN 1604 or equivalent)