Q5X BeltMic QT-5100

2,495.00 USD CAD

Q5X BeltMic QT-5100 — Micro-sized transmitter in an impact-resistant hard nylon case. Internal lithium-polymer rechargeable battery and LEMO connector for a removable lavalier mic.

  • Belt pack style
  • 8 hr run time @ 50mw
  • RF output settings 10 – 100mw

Choice of frequency block and additional compatibility mode. (All Q5X QT-5100 transmitters come with 2 default Q5X modes.)

Quantity:

SKU: Q5X.QT5100B Categories: , , , Tags: , ,
Share on:
Share on google Share on pinterest Share on mail

Description

Q5X BeltMic QT-5100

Micro-sized transmitter in an impact-resistant hard nylon case. Internal lithium-polymer rechargeable battery and LEMO connector for a removable lavalier mic.

  • Belt pack style
  • 8 hr run time @ 50mW
  • Power output range 10 – 100mW

Comfortable and Concealable

The Q5X QT-5100 BeltMic has a tough, composite, hard case with belt clip. This transmitter is the RCAS enabled version of our worlds smallest belt bodypack, the QT-300 BeltMic. Weighing less than 2 ounces and only a 1/2 inch thick, the QT-5100 BeltMic joins the QT-5100 series as the most comfortable audio transmitters in the industry.

The QT-5100 BeltMic utilizes the RCAS™ (Remote Control Audio System) a revolutionary way to remotely control transmitter settings from a central computer or handheld remote control.

3000 Channels

The QT-5100 BeltMic offers approximately 3,000 channels per frequency block. Available in 3 frequency blocks — tunable from 470 to 700 MHz in 25 kHz steps.

Technical Data

  • Dimensions: 53mm x 42mm x 19mm
  • RF output power: 10 to 100mW (user selectable, country restrictions apply)
  • Number of channels: approx. 3,000
  • UHF frequency range 470 to 700 MHz in 3 frequency blocks
  • Switching bandwidth: 75MHz (25 kHz steps)
  • Modulation: FM
  • Nominal deviation: +/- 40 kHz
  • Peak deviation: +/- 54 kHz
  • Pre-emphasis: 50 us
  • Compander: Q5X DCS-QT
  • Signal to Noise: 105dB (A) RMS
  • Frequency stability: +/- 0.001%
  • Spurious Emission: <- 60 dBc
  • Total harmonic distortion (THD): 0.3% at nominal deviation
  • Frequency response: 50 Hz to 17,000 Hz NOTE: System frequency response is dependent on the microphone element
  • Audio connector: 1 pin Lemo
  • Antenna: 1/4 wave flex
  • Battery: Internal lithium-polymer
  • Operating time: (Battery) estimated 8 hrs @ 50mW
  • Operating Temperatures: -10C to +45C
  • Approvals: FCC, CE, Industry Canada

Reviews

There are no reviews yet.

Be the first to review “Q5X BeltMic QT-5100”