-
K-Tek KAML
273.90 USD CADThe K-Tek Shark antenna mount is made for easily installing shark fin (log periodic) antennas used with sound carts.
-
K-Tek KSBCH1 Stingray Boom Cup Holder
35.90 USD CADThe Stingray Boom Cup Holder can attach to MOLLE straps like on the Stingray mixer bags or the limited-edition Stingray Backpack. It can also be screwed into or adhered to various carts or onto gear storage racks.
-
K-Tek KSTS1 Stingray Tension Straps (Set of 2)
19.00 USD CADThe Stingray Tension Straps are a convenient way to attach larger items to MOLLE straps. A locking clip on one end semi-permanently attaches to a MOLLE strip, while the adjustable end slides into another strips and locks under tension.
-
K-Tek K-SSM Shock Mount
154.90 USD CADThe K-SSM is a shorter version of the K-SM Shock Mount. This mount was designed specifically with the Sanken CS-1 microphone in mind.
-
K-Tek Stingray Utility Hip Pack X-Series
154.90 USDComfortable to wear, extremely versatile and spacious Hip Pack with two large main compartments for many accessories, tools and even a mobile phone. With removable thigh-strap; convenient in various on-set departments and off-set in personal life. Now, with the X-Series facelift with orange interior to match the X-Series Mixer Bags.
-
K-Tek KAMR Ring for K-Tek Shark Antenna Mount
59.90 USD CADThis replacement / spare ring is made for the K-Tek Shark antenna mount system.
-
K-Tek Stingray Large X Audio Mixer Recorder Bag X-Series
484.90 USD CADThe Stingray Large X is the latest bag in the third generation of Stingray Mixer bags – the Stingray X-Series
-
K-Tek KPTA – KlassicPro SIDE KICK Transmitter Adapter
162.90 USD CADThe Sidekick is a Bottom attachment for KlassicPro Boompoles: a Male 3-pin XLR with up-facing Transmitter Adapter and Rubber bottom. It was specifically designed to fit into Boompole Storage units like the Boom Box or the Boom Caddy, while attached to a Klassic Boompole and connected to a plug on Transmitter. Attaches to the bottom…
-
K-Tek KIP Interview Pole
134.90 USD CADNew Boompole / Extended Handgrip ideal for Newsmedia interview situations. Lightweight Graphite (Carbon Fiber) boom pole with a reach of 6′ (1.84m), collapses down to 38.5″ (97.79cm) and weighs only 0.65lbs. (285gr), while maintaining great rigidity. This interview pole comes with a foam grip.
-
K-Tek KPCCR Bottom Attachment for KlassicPro
149.90 USD CADBottom attachment for KlassicPro Boompoles: a Male 3-pin XLR Side Exit with removable Rubber Bumper. Cable Kit (KPCK9,KPCK12, KPCK16, KPCK20) is needed with TA3F that plugs right into the KPCCR. Once the cable kit is dropped through the top of the KlassicPro boompole and plugged into the module the bottom module simply screws onto the…
-
K-Tek KEG54 – 1’10” to 4’6″
237.90 USD CADThe KEG54 is a 3-section uncabled graphite boompole that extends from 1'10" to 4'6" (56cm - 137cm) and weighs in at just half a pound (227g).
-
K-Tek KE89 Avalon Aluminum Boompole — 2’5″ to 7’6
From: 189.90 USDThis K-Tek KE110 Avalon Aluminum Boom Pole has a collapsed length of 2’7″ (79cm) and an extended length of 9’2″ (279cm) and only weighs 1.458lbs (661g).
-
K-Tek K87 “Traveler” KLASSIC Boompole (Graphite)
From: 460.00 USDK87: TRAVELER (ultra short collapsed),Uncabled. 1'10" – 7'3"(55cm - 221cm) K87CCR: TRAVELER (ultra short collapsed) + CCR,internal coiled cable side exit. 2'2" – 7'5"(66cm - 226cm)
-
K-Tek Stingray KSHPS HeatBlock Transmitter Pouch: Small
35.90 USD CADK-Tek Stingray HeatBlock transmitter pouches, a new way to protect the talent from heat produced by wireless microphone transmitters worn on set.
-
K-Tek Stingray KSHBPC HeatBlock Pieces
35.90 USD CADK-Tek Stingray HeatBlock transmitter pouches, a new way to protect the talent from heat produced by wireless microphone transmitters worn on set.
-
K-Tek KGPS General Purpose Shock Mount
185.90 USD CADK-Tek General Purpose Shock Mount. Designed to support most microphones from 19 to 25mm in diameter.
-
K-Tek KP18VCCR Mighty Boom Pole. Graphite. 5 section. Internal coiled cable side exit
1,074.90 USD CADThe KP18VCCR, Mighty Boompole has a collapsed length of 59" (149.9 cm) and an extended length of 18'3" (5.58 m) and only weighs 2.4 lbs. (1.08 kg). This 5-section Boompole features a removable headpiece for cable reconfiguration without soldering. The top attachment is a 3/8" - 16 male thread and the bottom has a removable…