Communications Rental

The CC-26K is a single open ear, lightweight headset with an over-the-head design. The flexible neck boom and dynamic noise cancelling microphone help improve voice clarity.

The CCI-22 connects two 2-wire full duplex party-line circuits with the matrix. The interface supports Clear-Com signaling to and from the matrix system, deriving its power from the external party-line circuit. Levels and cable nulling are completely adjustable.

The MS-702 is a one-rack-space, two-channel main station with a regulated 1.2-amp "fail-safe" power supply, individual channel short-circuit protection, and a versatile intercom monitoring system.

4-Channel Headset/Speaker Main Station with Built-in 2-amp Power Supply, Rack Mount (2RU)

The RS-603 is a 2-channel 3-pin dual-listen monaural beltpack with a 4-pin male headset connector and 3-pin female/male loop through intercom line connectors. It also has a 2.5mm AUX headset connector and an RS-232 data connector for programming. Two channels of audio are passed down a single 3-pin XLR with TWC-701 or TWC-704.

The Tempest CM-944 (4-channel) BaseStation operates in the 900MHz frequency bands. The CM-944 Tempest900 BaseStations are compatible with existing 4-wire matrix or 2-wire Clear-Com, RTS or AudioCom partyline intercom systems.

The CP-942 Belt Pack (4-channel audio) is capable of true dual talk/listen functionality, allowing each user to simultaneously monitor and/or talk on two of the four channels (A or B and C or D).

TheTempest900 CCT-9RT Remote Antenna Transceiver; power provided by Tempest900 BaseStation via CAT-5 cable up to 1500 feet (300 meters). Comes with15 ft (4.5 m) CAT-5 cable and two whip antennas.

Compatible with both Clear-Com and RTS®, TW-47 connects virtually any set of walkie-talkies to anyone on the wired party-line intercom; simply use one walkie-talkie as a basestation.

4-Module TWC-701 Unit Rack Mount (1RU), four TWC units fit in one rack.

The V-Series is the new and innovative display panel for Eclipse, providing cutting edge Digital Signal Processing technology in an acoustically controlled contemporary design.

Additional Ear Pieces for above

Frequency agile base station transmitter for use with PR216 receivers. Includes power cord, telescopic antenna, carry case and user's manual.

Includes Comtek PR-72b Receiver if needed

Receiver with headphones

Frequency agile personal receiver. Includes headphones, belt clip, pouch and user's manual.

Transistorized megaphone with foghorn.

Digital Hybrid Telephone, Audio Line and Microphone Desktop Broadcast Station

The Lectrosonics IFBT4 UHF transmitter was designed for use in broadcast, motion picture, theater, and stage applications. The IFBT4 can be used as a stand-alone device or patched directly into popular intercom systems.

Includes cellular modem & mobile router with power supply. Provides wireless internet access anywhere. Perfect for internet access at remote locations.

In Ear VHF Receiver. 2 volume settings. Includes wax guards, and Zippered case.

Includes Comtek BST 25/216, Phase-Right High gain antenna, Phonak Invisity Receiver, Shure 522 push-to-talk microphone.

Works in the 216MHz range. Includes cleaning kit, Cerumex guards and battery.

Includes Comtek Base station transmitter, Antenna, (1) Phonak in-ear receiver.

The TX-300V is a wide area FM transmitter and perfect for covering large areas such as auditoriums, lecture rooms, houses of worship, town halls, movie theaters, theaters, universities, sports venues, shopping malls, railway stations and other public places.

The closed and supra-aural headsets HMD 26 are lightweight and designed for use in broadcast applications at TV and Radio. The headphones are dimensioned for high maximum SPL.

The Sennheiser HMD-280 is a high-quality headset ideal for professional use. The headphones have large dynamic drivers to produce a wide frequency response.

The Sennheiser HMD281 single-sided headset is equipped with a high-isolation, studio quality headphone and a highly directional dynamic microphone, attached to an adjustable boom, optimized for clarity of speech in high-noise location environments.

for use with BTR800.

and (1) Headset.