Zaxcom RX-12R Rack Mountable Receiver

From: 3,350.00 USD CAD

SKU: ZAX.RX12R Categories: , , , Tag:
Share on:
Share on google Share on pinterest Share on mail

Description

Zaxcom RX-12R

With increased sound challenges in studio and network applications, the Zaxcom RX-12R is designed to meet those demands while introducing new levels of technology in an affordable package.

A sibling to the very successful RX-12, the new RX-12R has been completely reimagined from the ground up. Rack mountable, its ergonomic design takes up only one-and-a-half rack spaces in height. As a wide-band receiver its full tuning range is 512 – 698 MHz and features a 35 MHz tracking front end filter to eliminate interference from unwanted radio frequency (RF).

The multifaceted design of the Zaxcom RX-12R, provides RF amplification and both antenna and power distribution for up to 6 Zaxcom QRX212 modules that fit precisely inside the RX-12R. For more critical applications, placing the QRX212 module in single channel mode will deliver 6 channels of true diversity audio while dual channel mode allows for up to 12 channels of audio when demand is less critical. All QRX212 modules are hot swappable and can be added or removed at any time.

The Zaxcom RX-12R receives a 100% digital signal that is fully encrypted resulting in audio quality far superior to any analog system. Additionally, it’s compatible with all Zaxcom modulations and transmitters.

A full color LCD lets users easily navigate the menu. The built-in frequency scanner and Auto-Pick software eliminates the guess work and can coordinate and choose the best frequencies with a push of a button. 6 XLR analog outputs and two DB25 connectors configure 12 analog or 12 digital signals. An antenna in and RF loop through provide support to daisy chain up to three RX-12R receivers to one set of antennas.

If paired with a Zaxcom Deva 24 or Nomad, the RX-12R can re-frequency the transmitters to match the RX-12R with a touch of a button via ZaxNet™.

A new feature on the RX-12R is an internal audio monitoring system to plug in headphones. It also touts auto-switching 12V redundant DC inputs

***Price does not include QRX212 modules***

Specifications

Output

Analog Audio Output: Balanced 0dB @ -20 dBFS (2-channel receiver)
Analog Audio Output Connectors: 6 x Male XLR Outputs
Digital Audio Output Connectors: 2 x DB25
Headphone Output: 1 x 3.5 mm

 

Digital I/O

Connectors: 1 x USB / 1 x RS422

 

Receiver

RF Input Connectors: 2 BNC
RF Output Connectors: 2 BNC
RF Impedance:  50 ohm
RF Gain Input / Output: 0 dB
RF Amp Noise Figure: .5 dB
RF Amp IP3: +30 dB input
RF Filter Band Pass: 35 MHz
RF Tuning Range: 512 – 698 MHz

 

QRX212 Module

Receivers Per Module: 2
Receiver Modulation: Zaxcom Proprietary Digital
Tuning Range:  512 – 698 MHz
Power Consumption: 300 ma @ 12 VDC

 

Misc

IFB200 Interface: Switchcraft TA5-M
Power: 8 VDC to 18 VDC (2 amps w/6 x QRX212 modules)
Power Type: Dual input auto switching
Power Connectors: 2 x Hirose HR10A-7P-4P
LCD Screen: TFT daylight readable color
LCD Size: 2.2″ diagonal
Size: 19″ x 10.2″ x 2.325″ (L x W X H)
Weight: 7.6 lbs (loaded w/ 6 x QRX212 receiver modules)